RF cable adaptor H.FL-MCX(f), cable Ø 1.37 mm, 13 cm
Features:
H.FL adaptor (pigtail) - MCX(f) with cable 13 cm length and 1.37 mm diameter.
The adaptor is designed for the frequency range of the H.FL 0-9 GHz / MCX 0-6 GHz connector. Connecting and detaching the H.FL and MCX connectors is easy, guarantee of 30 cycles due to the small size and strength of the H.FL connector. The MCX connector has a guarantee up to 500 cycles.
Cable adaptors (pigtails) then serve as an extension for connecting eg 2G / 3G / LTE / Wi-Fi / GPS antennas to various PCBs, modules, Mini PCI cards etc.
Parameters:
• Cable diameter: 1.37 mm
• Cable length: 13 cm
• Connector A: H.FL
• Connector B: MCX(f)
• Certification: RoHS
Connector A - Connector H.FL
Use:
H.FL connectors are compatible with U.FL connectors for applications where there is very little space for connecting / interconnecting RF components. The characteristic impedance of the connector is 50 Ohm and the operating frequency range up to 9 GHz.
Benefits:
• High reliability due to precise processing
• Low insertion loss
• Low VSWR
• Miniature dimensions
• High frequency range
Properties:
• Frequency range: Up to 9 GHz
• Impedance: 50
• MAX. VSWR: Female: <1.3: 1 (0.1-3 GHz) / <1.5: 1 (3-6 GHz) /1.9:1 (6-9 GHz)
Male: <1.3: 1 (0.1-3 GHz) / <1.4: 1 (3-6 GHz) 1.8: 1 (6-9 GHz)
• Guaranteed number of connections before deformation: 30
• Maximum operating voltage: 200 V AC / 1 min
• Operating temperature: -40 ° C to +90 ° C
• Certification: RoHS
Connector B - Connector MCX:
Use:
These are coaxial connectors with a latch mechanism. They are compatible with SMB connectors, but are 30% smaller than SMB connectors. The dimensions of the internal contact and the insulator are the same. The impedance of the connector is either 50 Ohm with an operating frequency range up to 6 GHz or 70 Ohm with an operating range up to 3 GHz. They are characterized by high reliability and mechanical stability. They are also used as standard connectors in GPS devices, WLAN networks, fixed and mobile communications.
Parameters:
• Impedance 50 Ohm
• 500 connect / disconnect cycles
• VSWR <1.35: 1
• Nominal attenuation: 0.1dB / 1 GHz
• Operating temperature -65˚C + 165˚C
• Frequency range 0-6 GHz "
Coaxial cable 1.37 mm
Cable features:
The coaxial cable is compatible with connectors that are applicable to a 1.37 mm cable diameter. Due to its features and size, it is widely used in applications that require high-frequency transmission using miniature coaxial connections. The characteristic impedance of the cable is 50 Ω. It is suitable for applications involving RF communication equipment, as well as electronic measuring instruments. It is most often used for creating cable adaptors with connectors such as U.FL / FAKRA / FME / MHF / MCX / MMC / N / QMA / SMA / SMA-RP / SMB / SMP / TNC and others. The resulting cable adaptors are most often used to connect external antennas to eg cellular modules or IoT / NB-IoT / WiFi / GNSS and other RF devices.
We are a Czech producer of custom cable adaptors. Use our simple configurator to specify your requirements. You can also contact our sales department for advice on choosing the right connector and cable.
The best selling cable adaptors (pigtails) are in stock, contact us or order via e-shop.
Technical parameters can be found in the attached datasheet or contact our sales department.