MyBox POST AC Pedestal Charging Station 2x 22 kW with Integrated 5' Display, 2 Sockets, OVP, Stainless Steel, Without Cables
Key features:
- Chassis made of stainless steel, glass, and European components.
- Secure authorisation (e.g. via RFID).
- Option to integrate with a photovoltaic system.
- Advanced management options.
- Support for a dynamic load management module (optional extra).
- 2× MID-certified electricity meter.
- 2× combined circuit breaker with RCD.
- 5' display - AFIR (320x240 pixels).
- Temperature kit.
- Surge protection (OVP).
- 6 mA DC leakage detection.
- Front lockable door for easy service access.
- Smart LED indicators for a perfect overview of the charging connector status.
- Communication via Ethernet or 2.4 GHz Wi‑Fi (4G/LTE optional extra).
- OCPP 1.6 communication protocol.
- Anti-vandal protection – surface finish for easy graffiti removal.
This product from the Czech manufacturer Elexim combines top-quality workmanship with the option of integration with a photovoltaic power plant (PV system). It is assembled exclusively from high-quality, readily available components from leading European manufacturers.
At first glance, the MyBox Post pedestal AC charging station stands out with its body made of painted steel and tempered glass. This combination of materials gives the station a luxurious appearance while also ensuring maximum safety and durability. For a more distinctive look, the station also offers the option of a custom-designed front panel.
Efficient charging of two vehicles at the same time
The station offers 2× 22 kW of power, allowing efficient charging of two electric vehicles or plug-in hybrids simultaneously. Thanks to the total output of up to 44 kW, connecting a second vehicle does not slow charging down — both vehicles charge at full speed. Robust construction, extensive configuration options, and advanced features make the MyBox Post a perfect choice for the commercial and public sectors. The stations can also be interconnected to create a network of up to 24 charging points.
Equipment and optional expansion
This specific configuration of the MyBox Post charging station (EL-MB-POST-OVP-LCD-S) is equipped with two Type 2 sockets (without fixed cables). Cable selection is optional: coiled or straight.
The equipment also includes a temperature kit, an RFID reader with four cards, two integrated MID meters, two combined circuit breakers with residual current protection, and a 5″ AFIR display (320 × 240 px). The station can also be optionally supplemented with a dynamic load management module. This actively protects the grid and prevents the main circuit breaker from tripping even when a heat pump or another high-consumption appliance is switched on at the same time. (This module is also a requirement when applying for subsidies from the New Green Savings programme or the National Development Bank.)
Durability and flexible installation
Trouble-free operation in any season is ensured by the wide temperature range from −30 °C to +50 °C. You can reliably charge your electric vehicle battery in freezing winter weather as well as in summer heat.
Power that grows with your needs
All MyBox Post stations are standardly equipped for charging power of up to 22 kW per connector. Although most current electric vehicles use an 11 kW onboard charger, the MyBox Post gives you room to grow. It is a clean and technically advanced solution that easily adapts to future electromobility standards.
Specifications:
- Max. input current: 3 × 64 A
- Max. output power: 44 kW
- Max. output power per connector: 22 kW
- Max. output current per connector: 3 × 32 A
- AC output voltage: 400 V (±10%)
- Protection rating: IP54/IK10 (not connected), IP44/IK10 (connected)
- Operating temperature: -30 °C to +50 °C
- Operating humidity: 5 to 95% non-condensing
- Dimensions: 370 × 1420 × 200 mm
- Weight of station without cable: 52 kg
Technical parameters can be found in the attached datasheet.