Antenna WiFi Ceiling Mount R3
Indoor ceiling antenna designed for receiving and transmitting WiFi signal and operates in band 2.4 GHz. The antenna can be used to amplify the WiFi signal to a WiFi Access point device (access point, e.g. router) in homes, offices and other places. WiFi Access Point allows devices such as smartphones, laptops, computers, tablets or televisions to connect to the internet without the need of cables.
The antenna is supplied with a 30cm cable RG58/U with an N(f) connector. The antenna can also be supplied with an SMA-RP(f) connector - this connector is the counterpart to the most commonly used connectors on WiFi APs.
Connector specifications N:
Connectors with a screw-thread mechanism. N connectors are characterized by high reliability and mechanical stability. The characteristic impedance of the connector is 50 Ohm and the working frequency ranges up to 11 GHz. The temperature range is -65 °C to +165 °C. N connectors are used, for example, to connect wireless WLAN devices, satellite systems and GSM / GPS / Wi-Fi antennas.
Cable specifications RG58 / U:
The RG58 coaxial cable is compatible with connectors applicable to a 5 mm cable diameter. It is mainly used for the 0-1 GHz frequency range, it can also be used for higher frequencies, but at the cost of higher attenuation. The characteristic impedance of the cable is 50 Ω. The reduction factor is fixed at 0.66. The most common cables of this type have a temperature range of -20 to 75 ° C. This cable is suitable for external WiFi / GPS / GSM antennas. It is also often used for creating cable adaptors with connectors such as BNC / FAKRA / FME / N / SMA / TNC and others. There are also specially modified types of RG58 cables for outdoor use, which are UV resistant, as well as for use in extreme conditions. There are made of different materials, different qualities.
Technical parameters can be found in the attached datasheet.